BidiTech · Advanced Water Process Control and Industrial AI
Contact Us
Tendering and Implementation FAQ
Home / Resources / FAQ

Tendering and Implementation FAQ

Scope of upgrade, interface requirements, implementation approach and acceptance.

Do existing PLCs or blowers need to be replaced?

No. The system is implemented on top of the existing control system. The edge controller sends airflow or dissolved oxygen setpoints to the PLC, and existing equipment control and safety interlocks remain unchanged.

Which online instruments are required?

Typically dissolved oxygen analyzers in each biological tank, an online effluent ammonia nitrogen analyzer and airflow meters; influent flow, influent ammonia nitrogen and COD can be used as feedforward signals. Instrumentation is assessed before the project starts, and any missing instruments are listed in the proposal.

How is operational safety ensured?

Setpoints have upper and lower limits and rate-of-change limits. On abnormal instrument data, communication loss or manual switchover, the system automatically returns to the original control mode.

How is acceptance assessed?

Mainly on effluent compliance over an agreed period and energy consumption per unit of treated water, compared with pre-upgrade data under the same conditions. The specific criteria are defined in the contract.

Can it be implemented together with precision chemical dosing?

Yes. Aeration interacts with carbon source and phosphorus removal chemical dosing; they can be handled together in the same controller or implemented in phases.

Do dosing pumps need to be replaced?

Generally not. The system adjusts dosing pumps through the existing PLC or dosing control cabinet, provided the pumps support remote frequency or stroke adjustment.

Can it be implemented without an online total phosphorus analyzer?

Chemical phosphorus removal control requires effluent or process total phosphorus data. Where instruments are missing, the proposal lists the additional instruments required and their installation locations.

What if the tender requires delivery of source code?

Source code and intellectual property terms are negotiated separately. Please discuss your specific requirements with us before bidding.

How is acceptance assessed?

Based on effluent compliance over an agreed period and chemical consumption per unit of water, compared with pre-upgrade data under the same conditions.

Do pumps need to be shut down for the upgrade?

No. The system executes scheduling through the existing PLC and variable frequency drives. It can first run in advisory mode, with automatic execution enabled after confirmation.

What if there is no energy metering for individual pumps?

VFD feedback can be used, or electrical parameter acquisition modules can be added. Existing data availability is assessed at the proposal stage.

How are energy savings evaluated?

Using specific energy consumption per m³ supplied (kWh/1,000 m³), comparing data before and after the upgrade under similar flow and pressure conditions.

Can control cabinets from different brands be connected?

Yes. Connection is via standard industrial protocols or additional acquisition modules; the specific approach depends on the equipment on site.

Will smart water renewal affect peak-hour supply?

The system reserves a safety margin based on demand patterns and automatically restores tank levels before peak hours.

Can it be integrated with the water utility's existing platform?

Yes. Data can be pushed to existing platforms via interfaces.

How does this differ from the advanced control modules built into a DCS?

BidiTech's solution is independent of any specific DCS brand, can be implemented on PLC/DCS from different vendors, and builds models specifically for water treatment processes.

What happens in case of model mismatch?

The system continuously monitors model quality and control performance and re-identifies models when necessary; on any abnormality, control can revert to the original mode.

Can satellite remote sensing pinpoint leaks directly?

No. Remote sensing is used to narrow the search area; pinpointing leaks still requires ground surveys.

Talk to the BidiTech Technical Team

Project consultation, technical solution discussions, joint R&D and partnership inquiries

Service hotline (China)400-003-6582After-sales technical support 176 8231 9631