BidiTech · Advanced Water Process Control and Industrial AI
Contact Us
Precision Chemical Dosing Control
Home / Solutions / Precision Chemical Dosing Control

Precision Chemical Dosing Control

Predicts chemical demand from influent quality and operating conditions. Applies to coagulant, phosphorus removal chemical and carbon source dosing, and is implemented on existing dosing equipment.

Overview

Dosing that follows water quality, not empirical ratios

Coagulant dosing in drinking water treatment plants and chemical phosphorus removal and carbon source dosing in wastewater treatment plants are commonly set by flow-proportional ratios or operator experience. When raw water turbidity, influent total phosphorus or nitrate change, dose adjustments often lag behind.

The BidiTech precision dosing system predicts effluent quality from online water quality data and process models, adjusts doses in advance, and constrains the output range and rate of change of dosing pumps.

Precision Chemical Dosing Control
Suitable for coagulation and sedimentation dosing in drinking water treatment plants and for chemical phosphorus removal and carbon source dosing in wastewater treatment plants
Key Technical Features

Control Structure and Technical Parameters

ItemDescription
Controlled VariablesSettled water turbidity / effluent total phosphorus / effluent total nitrogen or nitrate
Manipulated VariablesDosing pump frequency or stroke, chemical dosing flow
Feedforward and DisturbancesRaw water turbidity, influent flow, influent total phosphorus, water temperature, pH
ConstraintsDosing pump operating range, maximum adjustment per unit time, effluent limits
Operating ModesOpen-loop advisory / closed-loop control; can revert to the original control mode at any time
Project Example

Smart Upgrade of a Municipal Water Treatment Plant in Shandong

Smart dosing control and pump energy optimization: 22% lower chemical costs, 15% lower electricity costs and a 14-month payback period.

100,000 m³/d capacity
22%Chemical Cost Reduction
15%Electricity Cost Reduction
14 months payback period
View Case
FAQ

Tendering and Implementation FAQ

For a technical proposal for a specific project, please contact the BidiTech technical team.

Do dosing pumps need to be replaced?

Generally not. The system adjusts dosing pumps through the existing PLC or dosing control cabinet, provided the pumps support remote frequency or stroke adjustment.

Can it be implemented without an online total phosphorus analyzer?

Chemical phosphorus removal control requires effluent or process total phosphorus data. Where instruments are missing, the proposal lists the additional instruments required and their installation locations.

What if the tender requires delivery of source code?

Source code and intellectual property terms are negotiated separately. Please discuss your specific requirements with us before bidding.

How is acceptance assessed?

Based on effluent compliance over an agreed period and chemical consumption per unit of water, compared with pre-upgrade data under the same conditions.

Documentation

Precision Chemical Dosing Control Technical White Paper

Request   Contact Our Technical Team

Talk to the BidiTech Technical Team

Project consultation, technical solution discussions, joint R&D and partnership inquiries

Service hotline (China)400-003-6582After-sales technical support 176 8231 9631